Product code
B751
Linealuce
B751: LED module with Electronic control gear Spot Optic
Attention! Code no longer in production
Technical description:
Luminaire designed to produce direct light with LED light sources and spot optic. The body is made of extruded aluminium EN1706AC 46100LF subjected to phosphochromatisation treatment with double primer and passivation at 120°C. The die-cast aluminium end caps are complete with silicone gaskets 50/60 Shore A and are subjected to post-cooling (oven) system 4/6 h at 200°C. The liquid acrylic paint is baked at 150°C and ensures high resistance to the external environment and UV rays. The top of the optical assembly is closed by a hardened transparent colourless soda-lime glass screen (4 mm thick) fixed by silicone and complete with a plate with power LED. Optic with lens in plastic material. The product comes equipped with a plastic-material translucent filter. Nickel-plated brass cable clamp PG11 for single entry of power supply cable. All external screws are made of stainless steel A2. Complete with lamp. Red, green and amber LED available upon request.
Installation:
Wall installation by means of brackets and arms that can be extended and adjusted ± 90°. Ceiling installation by means of plate for ceiling or surface application, suspension cables and rigid rods.
Colour:
Grey (15)
Mounting:
wall surface|ceiling surface|ceiling pendant
Wiring:
Electronic control gear inside the fitting 220 ÷ 240V  50 ÷ 60 Hz.
Notes:
Accessories available: antiglare screen and installation accessories.
Class II;850°C;IK05;IP66
CE;BIS;EAC;Retilap;NOM;IRAM;CCC Pending
Product configuration: B751
B751: LED module with Electronic control gear Spot Optic
Product characteristics:
Total lighting output [Lm]: 1792
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 37.2
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 48.2
Voltage [V]: -
Life Time: 50,000h - L70 - B20 (Ta 25°C)
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 83
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 5.2
Nominal power [W]: 32
Colour temperature [K]: 3200
Nominal luminous [Lm]: 2163
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: 8°
MacAdam Step: 3